{"product_id":"ram-hd-rocker-guard","title":"AEV Ram Rocker Protection","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eEngineered specifically for Ram HD rocker geometry and real-world off-road impact conditions.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAEV Ram Rocker Protection was developed to provide substantial side-body protection while preserving ground clearance, factory breakover geometry, and compatibility with power steps.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eRather than adapting a conventional frame-mounted slider, AEV evaluated how full-size Ram trucks encounter trail obstacles and where rocker-area damage most commonly occurs. The resulting system protects the vulnerable sheet metal beneath the doors, lower door-sill area, outer door surfaces, and rear cab corners while maintaining a close-to-body profile.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned Around the Ram Platform\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe Ram platform presents several unique challenges for rocker protection. The truck’s long wheelbase, large tire size, rocker height, frame position, and substantial body curvature all influence how the vehicle contacts obstacles.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAEV’s analysis determined that direct vertical impacts beneath the rocker are relatively uncommon. More frequently, damage occurs as the vehicle leans toward rocks, trees, or other trail hazards, exposing the lower body, curved door surfaces, and rear cab corners.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAEV Ram Rocker Protection was engineered specifically for these conditions.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe stamped-steel center section closely follows the rocker panel and lower door profile, providing precise fitment while reinforcing the vulnerable sheet metal beneath the doors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eFull-Length Side Protection\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe system provides protection from the front wheel opening to the rear wheel opening.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIntegrated protection helps reduce exposure to:\u003c\/p\u003e\n\u003cul style=\"margin-top: 0in;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list .5in;\"\u003eRocks and trail obstacles\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list .5in;\"\u003eTire-thrown debris\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list .5in;\"\u003eIncidental side contact\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list .5in;\"\u003eLower door and rocker impacts\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list .5in;\"\u003eRear cab-corner contact\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eThe integrated nerf tubes extend outward to help protect the lower door surfaces and cab corners while also providing practical stepping surfaces.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eBody-Mounted Architecture\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAEV selected a body-mounted design to maintain clearance beneath the truck and avoid the compromises associated with frame-mounted systems that must extend outward from the frame rails.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis configuration keeps the protection positioned close to the rocker panels while preserving the vehicle’s existing ground clearance and factory breakover angle.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe mounting system distributes impact loads across a broad section of the lower cab structure rather than concentrating them at a small number of mounting points.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePower-Step Compatibility\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe system is designed to maintain compatibility with factory Mopar and AMP power steps.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis allows owners to retain the accessibility required on lifted trucks while adding dedicated rocker and lower-body protection.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe system can also be used without power steps, with the integrated nerf tubes providing additional stepping surfaces for vehicle entry, bed access, roof-rack access, and vehicle cleaning.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eStamped 11-Gauge Steel Construction\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe primary structure is manufactured from \u003cb\u003e11-gauge, 3 mm-thick A1011 steel\u003c\/b\u003e.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eA stamped-steel center section allows the component to closely follow the Ram’s curved rocker profile while adding structural strength and maintaining a close, vehicle-specific fit.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis geometry minimizes unnecessary material below the body and helps maximize available clearance.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eCorrosion Protection\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAEV Ram Rocker Protection uses a multi-stage \u003cb\u003ezinc, e-coat, and powder-coat finishing process\u003c\/b\u003e engineered to provide OE-level corrosion resistance.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAs with any steel protection component, finish damage may occur during off-road use. AEV touch-up paint can be used to repair damaged areas while maintaining the textured surface finish.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eVehicle Compatibility\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eFits:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e2010+ Ram HD 2500–3500 Crew Cab with 6'4\" Short Bed\u003cbr\u003e2009–2018 Ram 1500 Crew Cab with 6'4\" Bed\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eCompatible with:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul style=\"margin-top: 0in;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l2 level1 lfo2; tab-stops: list .5in;\"\u003eFactory Mopar® power steps\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l2 level1 lfo2; tab-stops: list .5in;\"\u003eAMP Research® power steps\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l2 level1 lfo2; tab-stops: list .5in;\"\u003eAEV Highmark fender flares\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l2 level1 lfo2; tab-stops: list .5in;\"\u003eFactory\/OEM fender flares\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l2 level1 lfo2; tab-stops: list .5in;\"\u003eMany aftermarket fender flares\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l2 level1 lfo2; tab-stops: list .5in;\"\u003eAEV splash guards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eInstallation\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eInstallation does not require welding and can be completed using common hand tools.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eBecause the system uses a body-mounted architecture designed to distribute loads through the rocker area, installation requires drilling and riveting at the rocker panels.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\n\u003cul style=\"margin-top: 0in;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo3; tab-stops: list .5in;\"\u003eFull-length protection from front wheel opening to rear wheel opening\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo3; tab-stops: list .5in;\"\u003eProtects vulnerable rocker and lower door-sill sheet metal\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo3; tab-stops: list .5in;\"\u003eStamped-steel construction follows the factory body profile\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo3; tab-stops: list .5in;\"\u003eConstructed from 11-gauge, 3 mm-thick A1011 steel\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo3; tab-stops: list .5in;\"\u003eIntegrated nerf tubes help protect lower doors and rear cab corners\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo3; tab-stops: list .5in;\"\u003eBody-mounted design preserves existing ground clearance\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo3; tab-stops: list .5in;\"\u003eMaintains factory breakover angle\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo3; tab-stops: list .5in;\"\u003eCompatible with factory Mopar® and AMP Research® power steps\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo3; tab-stops: list .5in;\"\u003eProvides integrated stepping surfaces\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo3; tab-stops: list .5in;\"\u003eCompatible with AEV Highmark fender flares\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo3; tab-stops: list .5in;\"\u003eCompatible with AEV splash guards\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo3; tab-stops: list .5in;\"\u003eMulti-stage zinc, e-coat, and powder-coat finish\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo3; tab-stops: list .5in;\"\u003eNo welding required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePurpose-Built Protection\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAEV Ram Rocker Protection was engineered around the geometry, construction, and real-world use of the Ram platform.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eBy combining stamped-steel reinforcement, close-to-body packaging, power-step compatibility, and full-length side protection, the system provides a vehicle-specific solution designed to protect critical body areas without unnecessarily compromising clearance or daily usability.\u003c\/p\u003e","brand":"American Expedition Vehicles","offers":[{"title":"Default Title","offer_id":67974807322776,"sku":"51060004AA","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0662\/2124\/4604\/files\/Ram2019_RockerGuardPA1_Web_2.jpg?v=1794428113","url":"https:\/\/aev-conversions.com\/products\/ram-hd-rocker-guard","provider":"American Expedition Vehicles","version":"1.0","type":"link"}